Many head units provide a remote-on lead, which connects directly to the Remote connector on your TC Series amplifier. Turning on your head unit will. in turn, automatically turn on the amplifier. If your head unit does not have a remote-on lead. you can still wire your system for remote turn-on by using one of these options:
Option I : Connect the antenna power lead to the Remote terminal on the TC Series amplifier. Note: This configuration may require that you have the power to the radio on when you play a tape or CD.
Option 2: Wire a switch in the passenger compartment to switch the positive terminal on the battery (+12V) to the Remote terminal on the amplifier. Alternatively, you can use the accessory position on the ignition switch to switch + 12V to the Remote terminal.